The white LEDs will still illuminate a greenish color because the green is actually printed on the back of the stock gauges. The LEDs will be brighter though.
Usage Disclaimer
Please note that the bulb quantity information described here does not cover high beam indicator lights, turn signals or any warning light usage. All instrument clusters bulbs are counted, checked for bulb types and fully tested to see what lighting options work for them. However, sometimes the information can be innacurate due to year changes that we may not know about. The above information may be used to purchase LED bulbs from our store but we do not offer any guarantee on the accuracy. If you are looking to convert your entire cluster to LED illumination just count all the warning lights, turn signals and high beam and add that number to the illumination quantity.
Warranty Information
Our white face gauges are guaranteed to be free from defects in material and/or workmanship and to perform as advertised when properly installed in accordance with written instructions. Failure to adhere to and/or comply with operation manual instructions will void all associated warranty obligations. Should any part(s) prove defective we will replace it free of charge.
I received my white overlays within about 5 days and they looks great, couple of hints which worked very well for me...
A very small fiber washer, like found in electronics, under the screws worked great for preventing the vinyl from wrinkling. I used red and they look trick. Also a strong led pen light will allow you to install without having to reconnect to the cluster.
Great value and deliver results
Posted by Chris L. on 08-26-2009
These guys are great to work with and the overlays on my 99 Miata look and function great. One hint I would give is when you tighten down the screws on the faces. Once snug, back off slightly. This will prevent any twist in the vinyl. I would also suggest removing the cluster and needles. Make sure the fuel tank is full and use a GPS to get an accurate speed reading after installation is complete. Thanks