Usage Disclaimer
Please note that the bulb quantity information described here does not cover high beam indicator lights, turn signals or any warning light usage. All instrument clusters bulbs are counted, checked for bulb types and fully tested to see what lighting options work for them. However, sometimes the information can be innacurate due to year changes that we may not know about. The above information may be used to purchase LED bulbs from our store but we do not offer any guarantee on the accuracy. If you are looking to convert your entire cluster to LED illumination just count all the warning lights, turn signals and high beam and add that number to the illumination quantity.
Warranty Information
Our white face gauges are guaranteed to be free from defects in material and/or workmanship and to perform as advertised when properly installed in accordance with written instructions. Failure to adhere to and/or comply with operation manual instructions will void all associated warranty obligations. Should any part(s) prove defective we will replace it free of charge.
This product is a great sticker for your black boring gauge. This looks great with a the other gauges I bought at GlowShift. I removed the unit out of the car and clean surface and then placed the gauge back on with only the unit plugged into the light source (glass cover off). I then put each gauge on one at a time and let each dry before starting the next on. (Take your time don’t rush) I would like to supply a picture if they had a down load for them.
Best product for the money!
Posted by Timothy Boyle Timmy_boy_99@yahoo.com on 11-03-2011
I bought a set of these for my 2005 mustang and they are wonderful!Very easy to install no real technical knowledge needed. Only took about 20 min from start to finish! And they look great with the My Color on my mustang, really makes the colors pop!
Easy to install and a great look
Posted by Jim Carolan on 10-27-2011
This was quite easy to install, and not having to remove the needles is a big plus. Be sure to do the install though in an area where you don't have a lot of bright light because it makes it difficult to determine if you have lined up the icons properly. I ended up removing the tachometer side and getting a replacement because I was outside in sunlight with the top down and got it off a little bit - so ordered a replacement which came quickly and started over on that side.
On the tachometer side I made a change and cut the decal in half. I found that the icons were difficult to see (couldn't tell if the OD Off icon was lit for example). I actually prefer the top half coverage to the entire gauge after making the change.